skip to main page content.
 

Building Contractors

Concrete supplier to building contractors in Ireland

Pier Caps

PLEASE NOTE: The symbol ″ refers to Inches, Foot measurements are indicated by 'ft'.

15″ Plain pier cap

15″ Plain pier capA plain 15″ Pier cap rising to a centre point. This cap is typically used for a small brick pier. It has a 2″ (50mm) side profile.

Dimensions

15″ x 15″ (380mm x 380mm).

back to the top list


18″ Plain pier cap

18” Plain pier capA plain 18″ Pier cap rising to a centre point. This cap is typically used for a small pier. It has a 2″ (50mm) side profile.

Dimensions

18″ x 18″ (460mm x 460mm).

back to the top list


22″ Plain pier cap

22” Plain pier capA Standard 22″ Pier cap rising to a centre point. This cap is typically used for a normal pier. It has a 2″ (50mm) side profile.

Dimensions

22″ x 22″ (560mm x 560mm).

back to the top list


28″ Plain pier cap

28” Plain pier capA plain 28″ Pier cap rising to a centre point. This cap is typically used for a large pier. It has a 2″ (50mm) side profile.

Dimensions

28″ x 28″ (710mm x 710mm).

back to the top list


32″ Plain pier cap

32” Plain pier capA plain 32″ Pier cap rising to a centre point. This cap is typically used for a large pier. It has a 2″ (50mm) side profile.

Dimensions

32″ x 32″ (815mm x 815mm).

back to the top list


36″ Plain pier cap

36” Plain pier capA plain 36″ Pier cap rising to a centre point. This cap is typically used for a very large pier. It has a 2″ (50mm) side profile.

Dimensions

36″ x 36″ (914mm x 914mm).

back to the top list


22″ Scallop edged Pier Cap

22” Scallop edged Pier CapA Scallop edge 22″ Pier cap rising to a centre point. This cap is typically used for a normal pier to match the scallop edge wall caps. It has a double curved side profile.

Dimensions

22″ x 22″ (560mm x 560mm).


28″ Scallop edged Pier Cap

28” Scallop edged Pier CapA scallop edge 28″ Pier cap rising to a centre point. This cap is typically used for a large pier. It has a double curved side profile to match the scallop edge wall caps.

Dimensions

28″ x 28″ (710mm x 710mm).

back to the top list


32″ Scallop edged pier cap

32” Scallop edged pier capA scallop edge 32″ Pier cap rising to a centre point. This cap is typically used for a large pier. It has a double curve side profile to match the scallop edge wall caps.

Dimensions

32″ x 32″ (815mm x 815mm).

back to the top list


22″ Security Pier Cap

22 inch Security pier CapThis pier cap is to match the security style 13″ wall cap to deter intruders from running on the top of the wall. It has a standard 22″ Pier cap rising to a centre point. This cap is typically used for a normal pier. It has a 3″ (57mm) side profile rising to 14″ (355mm)in the middle.

Dimensions

22″ x 22″ (560mm x 560mm).


back to the top listBack to the top