skip to main page content.
 

Home Owners

Home Owners and Landscape Designers concrete supplies

Kerbs

6 x 2 Garden edging flat top

6 x 2 Garden edging flat topThis is a precasted kerb for light duty. This is a kerb that is used for pedestrian walkways and paths. It has a flat top. It is not designed to withstand vehicular traffic.

Dimensions

6″ High, 2″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


6 x 2 Garden edging round pre-cast top

6 x 2 Garden edging round precast topThis is a precasted kerb for light duty. This is a kerb that is used for pedestrian walkways and paths. It has a rounded top, It is not designed to withstand vehicular traffic.

Dimensions

6″ High, 2″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


6 x 2 Garden edging flat top pressed

6 x 2 Garden edging flat top pressedThis is a hydraulically pressed kerb for light duty. This is a kerb that is used for pedestrian walkways and paths.It has a flat top. It is not designed to withstand vehicular traffic.

Dimensions

6″ High, 2″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


7 x 4 half battered pre-cast kerb

7 x 4 half battered pre-cast kerbThis is a precast kerb. It is a medium duty kerb typically used in domestic driveways. It is suitable for light vehicular traffic.

Dimensions

7″ High, 4″ Wide, 3 ft long. (175mm x 100mm x 914mm)

back to the top list


6 x 4 half battered pressed kerb

6 x 4 half battered pressed kerbThis is a hydraulically pressed kerb with a half battered profile. It would be suitable for light vehicular traffic. It is typically used in domestic driveways. Manufactured to BS EN 1340.

Dimensions

6″ High, 4″ Wide, 3 ft long. (150mm x 100mm x 914mm)


6 x 4 bull nose pressed kerb

6 x 4 bull nose pressed kerbThis is a hydraulically pressed kerb with a bullnose profile. It would be suitable for light vehicular traffic. It is typically used in domestic driveways. Manufactured to BS EN 1340.

Dimensions

6″ High, 4″ Wide, 3 ft long. (150mm x 1000mm x 914mm)

back to the top list


6 x 4 square pressed kerb

6 x 4 square pressed kerbThis is a hydraulically pressed kerb with a square profile (or Channel profile in the UK). It would be suitable for allowing brick paths to meet tarmacadam. It is typically used in large shopping centres allowing the architects to give wheelchair access directly from tarmacadam to brick forecourts. Manufactured to BS EN 1340.

Dimensions

6″ High, 4″ Wide, 3 ft long. (150mm x 100mm x 914mm)

back to the top list


6 x 5 half battered pressed kerb

6 x 5 half battered pressed kerbThis is a hydraulically pressed kerb with a half battered profile. It would be suitable for vehicular traffic. It is typically used in driveways it has the same profile as the larger 10x5 kerb. Manufactured to BS EN 1340.

Dimensions

6″ High, 5″ Wide, 3 ft long. (125mm x 100mm x 914mm)

back to the top list


Fern Edge Garden Edging

10 x 5 channel kerb This is a precasted decorative kerb for light duty. It is typically used in flower gardens, walkways and pond areas. It is not designed for vehicular traffic.

Dimensions

18″ long, 8″ high, 1 w″ide. (450mm x 200mm x 60mm).

back to the top list


Rope Edge Garden EdgingThis is a precasted decorative kerb for light duty. It is typically used in flower gardens, pond areas and walkways. It is not designed for vehicular traffic.

Dimensions

Dimensions: 2ft long, 8″ high, 2″ wide. (600mm x 150mm x 50mm).


back to the top listBack to the top