skip to main page content.
 

Our products at a glance

Doran Concrete Products

Kerbs

The menu on the left shows our full concrete products list. Please click into each category to view the range of products specific to each category.

6 x 2 Garden edging flat top

6 x 2 Garden edging flat topThis is a precasted kerb for light duty. This is a kerb that is used for pedestrian walkways and paths. It has a flat top. It is not designed to withstand vehicular traffic.

Dimensions

6″ High, 2″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


6 x 2 Garden edging round precast top

6 x 2 Garden edging round precast topThis is a precasted kerb for light duty. This is a kerb that is used for pedestrian walkways and paths. It has a rounded top, It is not designed to withstand vehicular traffic.

Dimensions

6″ High, 2″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


6 x 2 Garden edging flat top pressed

6 x 2 Garden edging flat top pressedThis is a hydraulically pressed kerb for light duty. This is a kerb that is used for pedestrian walkways and paths.It has a flat top. It is not designed to withstand vehicular traffic.

Dimensions

6″ High, 2″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


7 x 4 half battered pre-cast kerb

7 x 4 half battered pre-cast kerbThis is a precast kerb. It is a medium duty kerb typically used in domestic driveways. It is suitable for light vehicular traffic.

Dimensions

7″ High, 4″ Wide, 3 ft long. (175mm x 100mm x 914mm)

back to the top list


10 x 5 half battered pre-cast kerb

10 x 5 half battered pre-cast kerbThis is a precast kerb for heavy duty. It has a white smooth finish for people who are looking for kerb that is smoother than the hydraulically pressed version.

Dimensions

10″ High, 5″ Wide, 3 ft long. (255mm x 125mm x 914mm)

back to the top list


6 x 4 half battered pressed kerb

6 x 4 half battered pressed kerbThis is a hydraulically pressed kerb with a half battered profile. It would be suitable for light vehicular traffic. It is typically used in domestic driveways. Manufactured to BS EN 1340.

Dimensions

6″ High, 4″ Wide, 3 ft long. (150mm x 100mm x 914mm)

back to the top list


6 x 4 bull nose pressed kerb

6 x 4 bull nose pressed kerbThis is a hydraulically pressed kerb with a bullnose profile. It would be suitable for light vehicular traffic. It is typically used in domestic driveways. Manufactured to BS EN 1340.

Dimensions

6″ High, 4″ Wide, 3 ft long. (150mm x 1000mm x 914mm)

back to the top list


6 x 4 square pressed kerb

6 x 4 square pressed kerbThis is a hydraulically pressed kerb with a square profile (or Channel profile in the UK). It would be suitable for allowing brick paths to meet tarmacadam. It is typically used in large shopping centres allowing the architects to give wheelchair access directly from tarmacadam to brick forecourts. Manufactured to BS EN 1340.

Dimensions

6″ High, 4″ Wide, 3 ft long. (150mm x 100mm x 914mm)

back to the top list


6 x 5 half battered pressed kerb

6 x 5 half battered pressed kerbThis is a hydraulically pressed kerb with a half battered profile. It would be suitable for vehicular traffic. It is typically used in driveways it has the same profile as the larger 10x5 kerb. Manufactured to BS EN 1340.

Dimensions

6″ High, 5″ Wide, 3 ft long. (125mm x 100mm x 914mm)

back to the top list


10 x 5 half battered kerb

10 x 5 half battered kerbThis is a hydraullically pressed kerb for heavy duty. It has a dark grey pimpled finish. It is the standard road kerb for all council roads.

Dimensions

10″ High, 5″ Wide, 3 ft long. (255mm x 120mm x 914mm)

back to the top list


10 x 5 full battered kerb

10 x 5 full battered kerbThis is a hydraulically pressed kerb for heavy duty. It has a dark grey pimpled finish. It has a 45 degree angle on the top to allow vehicular traffic to drive over it in an emergency situation. Is not to be used alongside a pedestrian pathway.

Dimensions

10″ High, 5″ Wide, 3 ft long. (150mm x 50mm x 914mm)

back to the top list


10 x 5 channel kerb

10 x 5 channel kerb This is a hydraulically pressed kerb used for channeling surface water in the 8″ dish. It is designed for heavy traffic and is manufactured to BS EN 1340. The hydraulically pressed kerb is more durable and hard wearing than a traditional pre cast kerb.

Dimensions

10″ High, 5″ Wide, 3 ft long. It incorporates an eight inch dish, dipping 1″ in the middle. (255mm x 125mm x 914mm)

back to the top list


Fern Edge Garden Edging

10 x 5 channel kerb This is a precasted decorative kerb for light duty. It is typically used in flower gardens, walkways and pond areas. It is not designed for vehicular traffic.

Dimensions

18″ long, 8″ high, 1 w″ide. (450mm x 200mm x 60mm).

back to the top list


Rope Edge Garden Edging

Rope Edge Garden EdgingThis is a precasted decorative kerb for light duty. It is typically used in flower gardens, pond areas and walkways. It is not designed for vehicular traffic.

Dimensions

Dimensions: 2ft long, 8″ high, 2″ wide. (600mm x 150mm x 50mm).


back to the top listBack to the top